Deck & Fence Painting – Antioch, CA

Your deck and fence deserve the same level of care as the rest of your home. We combine deep surface preparation, quality coatings, and professional techniques to create finishes that endure California’s weather.

The ProFlow Advantage

• Weather-Resistant Coatings: Formulated to resist UV rays, moisture, and fading.
• Complete Surface Prep: Power washing, sanding, and sealing ensure proper adhesion.
• Custom Colors & Finishes: Choose from natural stains or solid color paints.
• Eco-Friendly Options: Low-VOC and water-based coatings for safe outdoor use.
• stand-behind-our-work promise: Confidence backed by guaranteed quality.

Protect and beautify your outdoor space — Request a Free Deck & Fence Estimate

We offer a full range of services for all deck materials — from redwood and cedar to composite surfaces.

Deck Painting

• Solid-color coatings for full coverage and modern style
• UV-protected paints for long-term fade resistance
• Slip-resistant coatings for stairs and high-traffic areas

Deck Staining

• Transparent and semi-transparent stains for natural wood beauty
• Deep-penetrating oil or water-based sealers
• Custom tinting to match exterior trim or siding

Deck Restoration

• Power washing and deep cleaning
• Sanding and surface leveling
• Board replacement and light carpentry repairs

Extend the life of your deck — Schedule a Free Consultation

Your fence is often the first thing people notice — we help it look great while protecting it from the elements.

• Wood fence painting and staining
• Iron and metal fence refinishing
• Gate, railing, and privacy screen painting
• UV- and moisture-resistant coatings for lasting results

We specialize in both new installations and restoration projects for older fences needing a refresh.

Every project follows a detailed, results-driven workflow to ensure long-lasting performance.

1. Consultation & Estimate
   We assess your deck or fence, discuss your goals, and provide a clear quote.

2. Preparation & Cleaning
   Surfaces are power washed, dried, and sanded to remove contaminants.

3. Repairs & Sealing
   We replace or patch damaged boards and apply sealers or primers as needed.

4. Painting or Staining
   Two coats of quality product are applied for protection and uniform finish.

5. Final Inspection
   We walk you through the completed project to ensure satisfaction.

We use industry-leading coatings and stains formulated for outdoor performance:

• Sherwin-Williams SuperDeck & WoodScapes
• Benjamin Moore Arborcoat
• Dunn-Edwards Ultrashield Exterior Wood Stain

All options are available in clear, semi-transparent, and solid-color finishes.

Sacramento’s hot summers, cool winters, and low humidity can take a toll on exterior wood surfaces. Our coatings are engineered to prevent:

• Fading from UV exposure
• Warping from temperature swings
• Moisture damage and mildew buildup
• Peeling and cracking from improper adhesion

Durability designed for California living — Get Your Free Quote

We recommend a professional deck and fence inspection every 2–3 years to maintain color and protection. ProFlow offers maintenance programs for ongoing care, cleaning, and touch-ups.

“Our deck looks brand new again — the color is perfect and water just beads off it.” — Karen L., Rocklin, CA
“They refinished our entire backyard fence and it looks amazing.” — Josh M., Roseville, CA
“Quality, communication, and care — we’ll definitely use them again.” — Sierra H., Folsom, CA

Give your deck or fence the professional care it deserves. ProFlow Painting delivers expert prep, quality coatings, and a beautiful finish that stands up to California weather.

Request Your Free Deck & Fence Painting Estimate Today
Serving Roseville, Rocklin, Granite Bay, Folsom, Lincoln, El Dorado Hills, and the Greater Sacramento Valley.

Most Antioch homes from the 1960s through the 1990s run redwood perimeter fences and small back decks — common in the older Delta-river tracts near Hillcrest and the waterfront. Newer subdivisions around Lone Tree Way and east Antioch use pressure-treated pine framing and cedar board-on-board fencing. We work on all of it: redwood, cedar, pressure-treated pine, and composite decking (Trex, TimberTech, Fiberon). Bay-edge wind at marina-adjacent properties can drive moisture into fence bases even in dry months, so we pay close attention to post bases and bottom rail contact when estimating.

We start with a pressure wash — or a soft-wash on older, more fragile redwood — to strip surface dirt, algae, and loose finish. After a 48-to-72-hour dry time, we sand rough grain, pull or set any popped fasteners, and replace soft or split boards before any product goes down. For penetrating stains we use TWP (Total Wood Preservative), Penofin, or Ready Seal depending on wood species and prior finish history. Where homeowners want a solid color coat, Sherwin-Williams SuperDeck or Benjamin Moore Arborcoat are our go-to systems. We don't skip the dry window — applying stain over damp wood is the number-one cause of early peel in this climate.

In Antioch's heat, a penetrating oil stain like TWP or Ready Seal holds up well on redwood and cedar — it soaks in rather than sitting on top, so it doesn't peel as a solid film coat can. The tradeoff: semi-transparent stains show the grain but require reapplication every 2-3 years given Antioch's intense summer UV. Solid color coatings (SuperDeck, Arborcoat) last a bit longer between recoats and give a cleaner, more uniform look — good choice for newer pressure-treated pine that doesn't have much visible grain worth showing. Either way, plan on a 2-to-3-year refresh cycle here.

Linear footage of fence is the main driver — longer perimeter runs mean more prep time and more product. Deck square footage, number of deck levels, and railing complexity all factor in. Board condition matters: a fence with soft, spongy posts or split rails needs carpentry before staining, which adds time. Prior finish type is relevant too — old solid paint over bare wood often needs stripping rather than just sanding. Post base condition at Delta wind-exposed properties can add scope if rot has started.

We recently refinished a redwood perimeter fence on a Hillcrest-area property — soft-wash, sand, two coats of TWP 100 in a cedar tone. Also completed a back deck on a newer east Antioch home: pressure-treated decking, pressure-washed, dried, then two coats of Sherwin-Williams SuperDeck solid in a driftwood gray. Both finished in two days.