Pressure Washing – Cameron Park, CA

Cameron Park homes are predominantly newer stucco and Hardie-plank. We wash all wall surfaces, concrete driveways and patios, wood or composite decks, and fence panels ahead of staining or coating. Pine pollen accumulation is heavy on roof decks, patios, and horizontal ledges — those surfaces get surface-cleaner treatment to clear the paste buildup that forms when pollen mixes with moisture. Pre-paint house washes are built into every exterior job we coordinate in the area, with a one-to-two-day window before the crew starts.

Stucco and Hardie-plank both get soft-wash at sub-500 PSI with sodium hypochlorite and surfactant at a 1:4 dilution. South-facing stucco with UV chalking gets a thorough soft-wash rinse to remove the chalk layer — paint won't bond over chalk, so this is a critical step, not cosmetic. Concrete driveways, patios, and any exposed aggregate surfaces get pressure-wash at 1,500–3,000 PSI with a rotary surface cleaner for flat areas, hand-wanding on steps and curb edges. Hardie-plank joints get careful low-pressure rinsing to avoid forcing water behind the cladding.

Property walk first — we check stucco condition, note any cracks or open caulk at window frames, and look at south wall chalk load. Windows and exterior lights get masked. Plants and ground cover get a water pre-rinse before chemistry is applied. Soft-wash top-down on all wall surfaces, with extra attention to south and west faces where pollen and UV chalk accumulate most. Concrete gets rotary surface-cleaner pass, then hand-wanding at edges, fence lines, and step risers. Plants rinse after chemical contact. Final walk before packing up.

Late spring (April through June) works well — pine pollen season is wrapping and temperatures are still below peak summer heat. Fall (September through October) is the pre-paint window before winter. For any painting project, wash one to two days before the crew arrives. Cameron Park's foothill elevation means UV exposure is higher than the valley, and south walls can re-chalk within two to three years on older paint — that's a sign the coating needs refreshing, not just cleaning.

Total wall surface area is the base. South-wall chalk load — heavier chalking takes more rinse volume and more passes. Total concrete footprint: driveways and patios vary on Cameron Park's master-planned lots. Deck size and material (wood vs composite). Number of fence panels for stain prep. Whether the wash is bundled with an exterior paint project or standalone affects mobilization.

Washed a two-story stucco home in Cameron Park's master-planned area — full house wash with UV chalk removal on the south elevation and pine pollen clear on the back patio and driveway, ahead of exterior repaint. Cleaned a Hardie-plank home near Bass Lake Road, removing pine pollen accumulation from all elevations before coating.