Skip to content
Cabinet Painting & Refinishing in Santa Rosa, CA

Free Estimate · Sonoma County

Cabinet Painting & Refinishing – Santa Rosa, CA

Factory‑smooth cabinet finishes for Santa Rosa kitchens, baths, and built‑ins — controlled prep, durable enamels, and careful hardware handling.

  • Licensed & insured crews
  • Response within 1 business day
  • Serving Santa Rosa & Sonoma County

Free estimate

Get your Santa Rosa quote

We respond within one business day with a real next step.

ServiceCabinet Painting & Refinishing

Prefer to call? (916) 740-7249

  • Free Estimates

    Written & Scoped

  • 1-Day Response

    Within 1 Business Day

  • One Crew

    Start Through Finish

  • Clean Jobsites

    Daily Cleanup, Final Walk-Through

  • Sacramento-Based

    Serving Greater Sacramento

Kitchen Cabinet Painting in Santa Rosa

Upgrade cabinets without a full remodel. We deliver spray‑applied, factory‑level finishes with dust control, masking, and enamel systems designed for daily use.

Where We Refinish

  • Kitchens & Pantries
  • Bath Vanities
  • Built‑ins & Mudrooms
  • Laundry Rooms

What we paint in Santa Rosa kitchens

Santa Rosa's housing stock is genuinely mixed. Older Victorian and 1950s-through-80s tract homes on the west side and near the Railroad Square area have original or previously painted wood cabinets — often oak or painted pine with layered finishes. Fountaingrove hillside homes trend toward larger custom kitchens with raised-panel or shaker profiles. Then there's Coffey Park and other Tubbs Fire rebuild areas: homes completed post-2017 with all-new construction, modern Level-5 drywall, and new shaker MDF cabinets from builders — these are in great condition and take paint beautifully. We work across all of it.

Our cabinet refinishing process

All doors and drawer fronts come off, labeled by position. We deglaze and sand box faces in place with dust containment. Doors spray off-site or in a mobile booth on your driveway — never brush-rolled on-site. Bonding primer first: INSL-X Cabinet Coat on previously finished or slick laminate surfaces. Topcoat is SW Emerald Urethane Trim Enamel or BM Advance. Pre-1978 homes in the older Santa Rosa neighborhoods get an EPA RRP lead-paint test before any sanding starts. Post-fire Coffey Park rebuild homes skip lead testing — new construction — and typically go straight to primer and topcoat on bare or factory-primed MDF.

Sheens and finishes for Santa Rosa kitchens

Wine country influence is strong in Santa Rosa. Warm earth tones, soft sage greens, and creamy off-whites are common requests — SW Accessible Beige, BM White Dove, and muted greens that complement natural wood and stone countertops. Coffey Park rebuild homes often go crisp white or light gray for a clean modern look on new shaker boxes. Stained alder with glass inserts is a popular wine-country request for owners who want warmth without heavy color. We use satin on most surfaces; semi-gloss on lower doors and drawer fronts that see the most contact.

What drives the cost in Santa Rosa

Door count and profile complexity are the primary variables. New MDF shaker doors from post-fire rebuilds spray faster than raised-panel oak on older stock. Pre-1978 homes add lead testing and potential RRP containment time. Box condition on older tract homes can vary — delaminating laminate or heavily water-damaged frames may not be refinishing candidates. Larger Fountaingrove custom kitchens with island cabinets and pantry runs add scope.

Cabinet projects we've done in Santa Rosa

We've refinished new builder-spec shaker cabinets in Coffey Park rebuilds, repainted multi-layer original oak in west-side tract homes, and updated Fountaingrove hillside kitchens with raised-panel doors in warm earth tones. Bath vanity refreshes in older Railroad Square-area homes are a recurring job — same process, tighter scope.

Our process

The 5-step cabinet painting & refinishing process we run in Santa Rosa

Every job in Sonoma County follows the same five stages — so you know what happens before, during, and after we paint.

  1. 01

    Consult

    On-site visit in Santa Rosa to measure, review surfaces, and confirm full scope of work.

  2. 02

    Prep

    Wash, scrape, sand, patch, caulk, and prime — no shortcuts before topcoat.

  3. 03

    Protect

    Floors, landscaping, fixtures, and furniture covered before any spray or brush.

  4. 04

    Paint

    Two-coat cabinet painting & refinishing system applied with the right method for each surface.

  5. 05

    Walkthrough

    Final walkthrough on site — no final payment until you've signed off.

What we refinish

Surfaces & spaces we refinish in Santa Rosa

Each surface gets the right prep, primer, and coating system spec'd for Sonoma County conditions.

  • Kitchens

    Inspect, prep, prime, coat — same standard on every job.

  • Bathrooms

    Inspect, prep, prime, coat — same standard on every job.

  • Built-Ins

    Inspect, prep, prime, coat — same standard on every job.

  • Mudrooms

    Inspect, prep, prime, coat — same standard on every job.

  • Laundry Rooms

    Inspect, prep, prime, coat — same standard on every job.

  • Wet Bars

    Inspect, prep, prime, coat — same standard on every job.

Local conditions

Why Santa Rosa's climate changes how we paint

Coatings and schedules are matched to Sonoma County weather — heat, fog, rain, and UV all factor into prep and product choice.

  • Coastal fog and vineyard dust require thorough washing.
  • Seasonal rains need breathable yet protective coatings.
  • Historic districts often request low-sheen heritage palettes.

Style fit

Popular home styles in Santa Rosa

  • Wine country estates
  • Craftsman bungalows
  • Coastal cottages
  • Farmhouses

FAQ

FAQ — Santa Rosa cabinet refinishing

I rebuilt after Coffey Park. My cabinets are new MDF — do I still need primer?

+

Yes. New MDF is porous and needs a bonding primer before topcoat. INSL-X Cabinet Coat seals the surface and gives the enamel something solid to grip. Skipping primer leads to peeling.

My older Santa Rosa home might have lead paint. What happens?

+

We test before any sanding. If lead is confirmed, we follow EPA RRP protocol: containment, HEPA vacuums, proper disposal. Required by law on pre-1978 stock.

Can you do stained alder with glass-insert doors?

+

We can refinish or restain existing alder cabinet frames. Glass-insert doors that need new glass or frame work are a separate trade — we handle the finish side.

How long does the project take on a full kitchen?

+

Most standard kitchens run 3–5 days: door removal and prep on day one, prime and first coat, final coat, reinstall. Larger kitchens or complex profiles add a day.

Ready when you are

Start your cabinet painting & refinishing project in Santa Rosa

Send the property details, photos, and timeline. A ProFlow project manager will respond within one business day with scoped pricing and a real schedule window.