Cabinet Painting & Refinishing – Concord, CA

We handle kitchen uppers and lowers, center islands, pantry cabinets, bath vanities, laundry room storage, and built-ins. Concord's ranch and tract homes from the 1950s–70s typically have 20–30 doors and drawers in the kitchen — original oak or maple frames with raised-panel or flat-slab doors. Older homes near Clayton Valley and Diablo Valley neighborhoods often have solid wood construction that takes enamel well. We also do bath vanities and mudroom built-ins, which are common in the larger floor plans found throughout the Clayton Road and Willow Pass corridors.

We remove all doors and drawer fronts, label each one for exact rehang position, and sand and degloss the boxes in place with dust containment. Doors and drawer fronts get sprayed off-site in a controlled environment or in a mobile spray booth on-site depending on access. We use INSL-X Cabinet Coat bonding primer on all surfaces before topcoating with Sherwin-Williams Emerald Urethane Trim Enamel, Benjamin Moore Advance, or Dunn-Edwards Aristoshield — all alkyd-hybrid enamels that cure hard and resist chipping in daily kitchen use. Concord's inland location means faster cure times than bay-side cities, which works in our favor on tighter project schedules.

Satin is the most requested sheen for kitchen cabinets — it cleans easily and doesn't show every fingerprint. Semi-gloss works well for bath vanities where moisture resistance matters. For Concord's older ranch kitchens, warm whites like Benjamin Moore Simply White (OC-17) and Sherwin-Williams Alabaster (SW 7008) are the most common requests — they brighten up the smaller galley layouts typical of 1960s builds. We also do a fair number of two-tone kitchens where lowers go in a deeper color like Hale Navy or Accessible Beige while uppers stay white.

Door and drawer count is the primary variable — a 20-door kitchen costs less than a 35-door one. Wood vs. MDF vs. thermofoil affects prep: thermofoil needs deglossing and bonding primer or it won't hold. Color change (dark to light or light to dark) adds a sealer coat. Hardware retention vs. full replacement is the other big factor — we can work around existing pulls or prep for new hardware. Concord's tract homes tend toward mid-range kitchen sizes, so most projects fall in a predictable scope.

We've refinished original oak kitchens in the Clayton Valley area where the 1960s raised-panel doors got stripped back, primed with INSL-X, and sprayed in SW Alabaster — a clean transformation without touching the layout. We've also done bath vanities in the Willow Pass and Concord Boulevard neighborhoods where landlords needed a cost-effective refresh between tenants.